The class 150 bolted bonnet flexible wedge gate valve is an industrial isolation valve engineered for piping systems requiring full, bi-directional shut-off and minimum pressure drop when fully open. Designed and manufactured in strict compliance with API 600 and ASME B16.34, this heavy-duty valve delivers dependable performance across critical process industries.
Design Highlights & Engineering Advantages
API 600 Heavy-Duty Wall Thickness: Engineered with full structural wall margins to withstand line stresses, pipe loads, and pressure surges.
Low-Fugitive-Emission Stem Seal: Fitted with API 622 / ISO 15848-1 certified packing systems as standard, reducing VOC emissions to less than 100 ppm for environmental compliance.
Precision Seating & Stellite Facing: Seats and wedges feature precision CNC alignment. Optional Stellite hardfacing on seating surfaces prevents galling, erosion, and thermal binding under high temperatures.
Self-Aligning Flexible Wedge: Accommodates piping distortion and thermal expansion while maintaining seat tightness across frequent thermal cycling.
Full-Bore Flow Efficiency: Fully retracted wedge design ensures an unobstructed flow path, minimizing fluid turbulence and pressure drop.
Serviceable Bolted Bonnet: Designed with encapsulated spiral-wound gaskets for uniform seating pressure and easy inline maintenance.
Technical Specifications
|
Parameter |
Specification / Standard |
|
Design Standard |
API 600 / ASME B16.34 / BS 1414 |
|
Pressure Class |
ASME Class 150 |
|
Nominal Sizes |
2" to 36" (DN50 - DN900) |
|
Face-to-Face Standard |
ASME B16.10 (Flanged / Butt-Weld) |
|
Flange Dimensions |
ASME B16.5 (RF, RTJ) / ASME B16.47 Series A/B |
|
Inspection & Testing |
API 598 / ISO 5208 |
|
Fugitive Emissions |
API 622 / ISO 15848-1 Compliant |
|
Fire Safety Standard |
API 607 / API 6FA (upon request) |
|
Body / Bonnet Material |
WCB, LCC, CF8, CF8M, CF3M, Duplex SS, Alloy Steel |
|
Operation |
Handwheel, Bevel Gear, Electric Actuator, Pneumatic Actuator |
|
Documentation |
EN 10204 3.1 MTR, Pressure Test Report, NDE Reports (RT/PT/MT) |
Standard API Trim Configurations
|
API Trim No. |
Nominal Trim / Seating Surface |
Stem Material |
Typical Service Application |
|
Trim 1 |
13Cr / 13Cr |
13Cr |
Oil, gas, non-corrosive liquids, and general utility lines |
|
Trim 5 |
Hardfaced Stellite / Stellite |
13Cr |
High-pressure, high-temperature steam and abrasive media |
|
Trim 8 |
Universal (13Cr / Hardfaced Stellite) |
13Cr |
Standard refinery, petrochemical, and general hydrocarbon service |
|
Trim 10 |
316 Stainless Steel / 316 SS |
316 SS |
Corrosive chemical process lines and low-temperature fluids |
|
Trim 12 |
316 SS / Hardfaced Stellite |
316 SS |
Severe corrosive and erosive environments |
Detailed Construction
Flexible Wedge Assembly
The engineered flexible wedge features a central slot along its outer edge, providing controlled elasticity. This design automatically adjusts for seat angle alignment deviations caused by piping stress or thermal expansion, preventing the valve from sticking during shut-off.
Bonnet Sealing & Bolting
The bonnet flange utilizes high-strength stud bolting calculated to comply with strict ASME pressure vessel codes. Fully enclosed spiral-wound stainless steel gaskets with graphite filler ensure high seal integrity under thermal cycling.
Stem Packing & Emission Control
To comply with stringent environmental regulations, the stem packing box features die-formed flexible graphite packing rings with anti-corrosion inhibitors and woven graphite end-rings. Live-loading spring washers can be integrated for maintenance-free stem seal performance.
Quality Assurance & Factory Testing
Material Traceability (EN 10204 3.1): All pressure-retaining castings and forgings undergo chemical and mechanical analysis. Heat numbers are permanently stamped on every valve body and bonnet.
Non-Destructive Examination (NDE): Radiographic (RT), Magnetic Particle (MT), and Liquid Penetrant (PT) testing are conducted on critical castings per specification (ASME B16.34 Appendix I).
API 598 Pressure Testing:
Shell Hydrostatic Test: 1.5 x CWP (Cold Working Pressure)
High-Pressure Seat Hydrostatic Test: 1.1 x CWP
Low-Pressure Air Seat Test: 80 - 100 psi (5.5 - 7 bar)
Dimensional & Visual Verification: Critical dimensions (face-to-face, flange thickness, stem diameter) and surface finishes are 100% inspected prior to coating and packing.
Target Applications
Refining & Petrochemical: Crude oil distillation, catalytic cracking, utility steam, and hydrocarbon isolation.
Oil & Gas Pipelines: Mainline isolation, pig launch/receive stations, and tank farm manifolds.
Chemical Processing: Acids, solvents, and corrosive chemical transfer lines requiring high-alloy trims.
Power Generation: High-pressure feed water, condensate, and auxiliary steam systems.
Water & Municipal Utilities: Industrial water treatment and cooling tower isolation lines.
FAQ
Q: What is the allowable working pressure for a Class 150 Gate Valve?
A: Class 150 does not mean a constant maximum working pressure of 150 psi. The allowable pressure depends on the valve body material and operating temperature according to ASME B16.34 Pressure-Temperature Ratings.
Q: Why choose a flexible wedge instead of a solid wedge?
A: A flexible wedge provides dynamic elasticity. It compensates for minor seat misalignment caused by pipe stress and prevents "thermal binding" (where thermal expansion locks the wedge into the seats when closed at high temperatures).
Q: Can Class 150 gate valves be used for throttling applications?
A: No. Gate valves are designed strictly for fully open or fully closed isolation. Operating a gate valve in a partially open (throttling) position causes fluid turbulence, vibration, and severe erosion on the wedge and seat sealing surfaces.
Q: What flange facing and end connection options are available for Class 150 valves?
A: Class 150 gate valves are most commonly supplied with Raised Face (RF) flanged ends according to ASME B16.5. Ring Type Joint (RTJ) flanges, Flat Face (FF) flanges, and Butt-Weld (BW) end connections per ASME B16.25 are also available based on project piping requirements.
Q: What certificates and quality documentation are provided with shipment?
A: Standard supply packages include the EN 10204 3.1 Material Test Certificate, API 598 Pressure Test Report, Certificate of Compliance (CoC), and General Arrangement (GA) Drawing.
Hot Tags: class 150 bolted bonnet flexible wedge gate valve, China class 150 bolted bonnet flexible wedge gate valve manufacturers, suppliers, factory, Bevel Gear Petrochemical Gate Valve, NRS Compact Gate Valve

