

Fully Lined EPDM Rubber Flange Butterfly Valve

Product Material
Core design: The white ductile iron valve body undergoes sandblasting and rust removal, followed by baking paint treatment to form a dense white protective layer. In addition, it can effectively isolate water vapor and corrosive media to prevent rusting of the valve body after prolonged storage.
The valve plate with ethylene propylene rubber lining is entirely wrapped in EPDM rubber, which is vulcanized at high temperature and bonded to the valve body in one molding process. EPDM is resistant to water and ozone (better than NBR), and is suitable for media such as municipal water. Rubber will deform with pressure, eliminating the risk of leakage.
The red handle can serve as a safety warning and prevent accidents caused by accidental contact. The markings on the handle for opening and closing can be used for intuitive control.
Product Advantages
Firstly, it is prohibited to use EPDM rubber in steam pipelines, as prolonged exposure to steam above 100 ℃ can accelerate aging and lead to seal failure
Secondly, the pipeline should be cleaned before installation. Hard objects with larger particles can scratch the lining layer. The pipeline must be flushed before installation. It is recommended to open the valve plate at 10 ° for more thorough flushing.
Thirdly, avoid excessive torque operation, and stop when the handle is operated to the 90 ° limit! Forcefully pulling will damage the valve stem.
Fourthly, the storage environment requirement is that the valve plate should be in a 5 ° slightly open state when stacked in the warehouse, which can prevent the rubber from being deformed under long-term pressure.


What are the application scenarios of FAQ
Municipal water engineering: Suitable media include tap water, rainwater, etc. The white valve body is easy to distinguish from the fire pipeline
HVAC system: Suitable media include chilled water and hot water (≤ 100 ℃)
ISO9001 control valve body casting → lining rubber vulcanization → assembly process, batch consistency reaches 98%
Basic Information

Technical Parameters

Executive Standards

Parts → Finished Products → Shipping












Hot Tags: fully lined epdm rubber flange butterfly valve, China fully lined epdm rubber flange butterfly valve manufacturers, suppliers, factory, Signal Feedback Flange Valve, SS PTFE-Lined Flange Valve, SS Metal-Seat Electric Butterfly Valve, Full EPDM Lined Flanged Butterfly Valve, Ductile Iron Electric Flanged Butterfly Valve, Butterfly Valve Flange Type
