Description

Send Inquiry

Electric Wafer Butterfly Valve - Motorized & Reliable

Product Advantages

The valve body and valve plate are both made of ductile iron material, which has excellent compressive performance and can withstand PN16 pressure. The valve body will not deform and can withstand high-pressure impacts. The wear resistance of ductile iron can reduce the friction loss of the valve. Even under working conditions of 80 ℃, the performance of the valve will not deteriorate, making it suitable for medium temperature scenarios such as hot water circulation.

In addition, the wafer type design is very convenient to install, without the need for flange gaskets during installation. Bolts are used to connect the valve and pipeline flanges, saving installation space. This design also saves installation space and improves construction efficiency.

Comparison with other products

Compared with ordinary electric butterfly valves, the adjustment accuracy of ordinary electric butterfly valves is relatively low, which may not perform well in fine flow regulation scenarios. However, this multi turn electric actuator can more accurately control the angle of the valve plate and reduce material waste. In addition, multi turn electric actuators have a larger output torque and are also suitable for pipelines with larger diameters.

Compared to pneumatic butterfly valves, pneumatic butterfly valves cannot be used in scenarios without a gas source. But electric butterfly valves only need to be connected to the power supply to work directly, and their response speed is more stable.

Product Features

Full EPDM Lining

Body and disc fully lined with EPDM rubber, resistant to acids, alkalis, and oxidants (pH 3-12).

Precision Turbine Control

20:1 gear ratio reduces operating torque by 60% for accurate flow regulation.

Bidirectional Sealing

EPDM soft seat achieves ISO 5208 Grade A leakage standard.

Compact Wafer Design

40% lighter than flanged valves with 50% faster installation.

Low Maintenance

Self-healing EPDM lining extends service intervals.

Nominal diameter DN		Size (mm)														Weight (kg)
Nominal diameter DN		A	B	C	D	L	H	D₁	N-Ø	K	E	n₁-Ø₁	Ø₂	G	D₂-M	Weight (kg)
(MM)	(inch)	D7_A1/37_A1/67_A1/97_A1X-1.0/1.6
50	2"	161	80	42	52.9	32	84.84	120	4-23	77	57.15	4-6.7	12.6	118	-	2.5
65	2.5"	175	89	44.7	64.5	32	96.2	136.2	4-26.5	77	57.15	4-6.7	12.6	137	-	3.2
80	3"	181	95	45.2	78.8	32	61.23	160	8-18	77	57.15	4-6.7	12.6	143	-	3.6
100	4"	200	114	52.1	104	32	70.8	185	4-24.5	92	69.85	4-10.3	15.77	156	-	4.9
125	5"	213	127	54.4	123.3	32	82.28	215	4-23	92	69.85	4-10.3	18.92	190	-	7
150	6"	226	139	55.8	155.6	32	91.08	238	4-25	92	69.85	4-10.3	18.92	212	-	7.8
200	8"	260	175	60.6	202.5	45	112.89/76.35	295	4-25/4-23	115	88.9	4-14.3	22.1	268	-	13.2
250	10"	292	203	65.6	250.5	45	92.4	357	4-29	115	88.9	4-14.3	28.45	325	-	19.2
300	12"	337	242	76.9	301.6	45	105.34	407	4-29	140	107.95	4-14.3	31.6	403	-	32.5
350	14"	368	267	76.5	333.3	45	91.11	467	4-30	140	107.95	4-14.3	31.6	436	-	41.3
400	16"	400	309	86.5	389.6	51.2/72	100.47/102.42	515/525	4-26/4-30	197	158.75	4-20.6	33.15	488	-	61
450	18"	422	328	105.6	440.51	51.2/72	88.39/91.51	565/585	4-26/4-30	197	158.75	4-20.6	38	539	-	79
500	20"	480	361	131.8	491.6	64.2/82	96.99/101.68	620/650	4-26/4-33	197	158.75	4-20.6	41.15	539	-	128
600	24"	562	459	152	592.5	70.2/82	113.42/120.46	725/770	4-30/4-36	276	215.9	4-22.2	50.65	816	-	188
700	28"	624	520	163	695	66/82	109.65	840	20-30/24-36	300	254	8-18.0	55/63.35	895	4-M33	284
800	32"	672	591	188	794.7	66/82	124	950	24-33/24-39	300	254	8-18.0	55/63.35	1015	-	368
900	36"	720	656	203	864.7	118	117.57	1050	28-33	300	254	8-18.0	75	1115	4-M30	713
1000	40"	800	721	216	965	142	129.89	1160	28-36	300	254	8-18.0	85	1230	4-M33	864
1200	48"	900	780	254	1020	180	141.33	1340	32-39	300	254	8-18.0	95	1450	4-M36	1130

Basic Information

Model NO.	D71X / D371X / D671X / D971X	Connection Form	Wafer
Structure	Centre Sealing	Seal Form	Force Sealed
Valve Stem	Normal	Work Pressure	0.6MPa / 1.0MPa / 1.6MPa / 2.5MPa / Class150
Working Temperature	Normal Temperature (-40°C < T < 120°C)	Material of Seal Surface	Soft Sealed / Hard Sealed
Valve Body	Casting	Standard	API 609
Application	Industrial Usage, Water Industrial Usage, Household Usage	Seated Material	EPDM, NBR, PTFE, FKM
Certification	ISO9001	Flow Resistance	Low Resistance
Transport Package	Export Wooden Crate	Specification	DN25 - DN1600
Origin	China	HS Code	8481804090
Production Capacity	50,000 pieces/Year

Technical Parameters

Size	DN32-DN600	DN650-DN2000
Working pressure	16Bar	10Bar
Shell	24Bar	15Bar
Seal	18Bar	11Bar
Operating Temperature	-45°C~+150°C
Operating Environment	Ballast and bilge system Chemical processing Desalination plants Drilling rigs Drinking water Dry powder Food and beverage Gas plants HAVC Mining industry Paper industry Sand handling Seawater Sugar industry Thermo technical water treatment Waste water
Driving Method	Hand Lever Worm Gear Electric Pneumatic

Executive Standards

Design Standard	EN 593, MSS SP67, API 609, BS 5155
Inspection & Test	API 598, ISO 5208, EN 12266
End Standard	ANSI B16.1 CL. 125LB & B16.5 CL. 150LB
	AS 2129 Table D & E
	BS 10 Table D & E
	DIN 2501 (PN6, PN10, PN16)
	EN 1092 (PN6, PN10, PN16)
	ISO 2531 (PN6, PN10, PN16), 7005 (PN6, PN10, PN16)
	KS B / JIS B 1511 / 2210 (5K & 10K)
	MSS SP44 CL. 150LB
	AWWA C207
	SABS 1123 Table 1000/3 & Table 1600/3
Face to Face	ISO 5752, EN 558, MSS SP67, API 609, DIN 3202
Top Flange	ISO 5211