Types of PTFE butterfly valves

Mar 20, 2025

Leave a message

‌PTFE butterfly valves mainly include center-seal butterfly valves, single-eccentric butterfly valves, double-eccentric butterfly valves and triple-eccentric butterfly valves. These types differ in structural design and application scenarios:

‌Center-seal butterfly valve‌: The valve shaft coincides with the center of the butterfly plate and the center of the valve body. It has a simple structure and is suitable for low-pressure (PN≤1.6MPa) and normal temperature (-20℃~80℃) water, air and other media, such as municipal water supply and drainage pipes. Typical models include D71X (wafer type) and D41X (flange type).

‌Single-eccentric butterfly valve‌: The valve shaft deviates from the center of the butterfly plate by about 1/3 radius, reducing the friction of opening and closing. It is suitable for clean pipes such as food and pharmaceuticals that require zero leakage. Its pressure bearing capacity is ≤4.0MPa, suitable for high-pressure working conditions.

‌Double eccentric butterfly valve‌: The valve shaft deviates from the center of the butterfly plate and the center of the valve body at the same time. When the butterfly plate is opened, it is completely separated from the valve seat, and the friction is almost zero. It is suitable for high temperature (≤425℃) and high pressure conditions, such as high temperature steam pipelines in petrochemical and metallurgical industries. Typical applications include metallurgical blast furnace gas pipelines and power boiler bypass systems. ‌Triple eccentric butterfly valve‌: On the basis of double eccentricity, the sealing surface is tilted at a certain angle to achieve zero leakage hard sealing. It is suitable for high pressure (≤25MPa) and high temperature (-196℃~700℃) conditions, such as LNG cryogenic storage tanks and nuclear power plant main steam pipelines. Its adjustment ratio is as high as 100:1, which is suitable for precise flow control.

Send Inquiry