Tips For Using Concealed Stem Gate Valves

Apr 11, 2025

Leave a message

The tips for using concealed stem gate valves mainly include the following aspects:

★Installation tips:

Inspection before installation: Before installation, the various standards of the concealed stem gate valve must be carefully checked to ensure that the diameter meets the use requirements. At the same time, care should be taken to avoid collisions with the valve during transportation.
Installation location: The concealed stem gate valve can be installed directly on the pipeline, usually anywhere on the pipeline, but it is necessary to consider future operation and maintenance and choose a suitable installation location. Pay attention to sealing during installation to prevent leakage.
Clean up dirt: Before installation, the dirt in the valve body should be removed to ensure the normal operation of the valve.
★Tips for use:

Handwheel operation: The concealed stem gate valve should be operated with a handwheel, and do not use levers or other tools to avoid damaging the valve. The handwheel rotates clockwise to close, and vice versa to open.
Regular lubrication: During use, it should be kept clean and the transmission thread should be lubricated regularly. When a fault is found, it should be stopped immediately and the cause should be found out.
‌Status Judgment‌: Since the valve stem of the concealed stem gate valve is hidden inside the valve body, the degree of opening cannot be directly observed. The state of the valve needs to be judged by the rotation direction and number of turns of the handwheel. Turn the handwheel clockwise to close, and counterclockwise to open‌.

Send Inquiry