Selection Of Rising Stem Gate Valves

Apr 12, 2025

Leave a message

The selection of rising stem gate valves mainly needs to consider the following key factors:

Application environment: If the environmental conditions are harsh, such as the presence of corrosive media or a lot of dust, the rising stem gate valve may be more susceptible to environmental influences, resulting in reduced sealing performance. Therefore, in harsh environments, non-rising stem gate valves may be a better choice.

Space constraints: The rising stem gate valve is taller when fully open and requires a larger installation space. If the installation space is limited, non-rising stem gate valves may be more suitable due to their compact design.

Maintenance and operation: The valve stem of the rising stem gate valve is outside the valve body, which is easy to maintain and lubricate. The valve stem thread of the non-rising stem gate valve is inside the valve body, which is difficult to maintain and lubricate, and the valve stem is easily corroded by the medium, which may cause valve damage.

Cost considerations: The initial cost of the non-rising stem gate valve may be slightly higher, but its long-term maintenance cost may be lower because its structure reduces the risk of leakage and extends its service life.

‌Sealing requirements‌: If a tight seal is critical, such as in a water treatment plant or sewage system, a rising stem gate valve may be more suitable because its stem is exposed for easy observation and maintenance‌.

‌Media type‌: Consider factors such as the type of controlled fluid or gas, pressure and temperature conditions, flow rate, and operating frequency. These factors will directly affect the selection and design of the valve‌.

Send Inquiry