How to choose a wafer butterfly valve?

Mar 07, 2025

Leave a message

When choosing a wafer butterfly valve, you need to consider the following key factors:

Media parameters: Wafer butterfly valves are suitable for neutral or low-corrosive fluid media, such as clean water, sewage, oil, natural gas, etc. Its applicable temperature range is -40℃ to 200℃, suitable for normal temperature or medium temperature environment.

Pressure level: Wafer butterfly valves are suitable for medium and low pressure pipeline systems, and the pressure level is generally PN≤4.0Mpa.

Viscosity and solid content: Suitable for media with viscosity ≤600mm²/s and solid content ≤5%.

Material selection: The valve body material is usually cast iron, carbon steel or stainless steel, and the sealing surface material can be rubber or polytetrafluoroethylene. These materials have good corrosion resistance and sealing performance.

Installation and maintenance: The wafer butterfly valve connects the valve between two pipe flanges through stud bolts. Installation and disassembly are relatively simple, but attention should be paid to protecting the sealing surface to prevent damage. It has a simple structure, light weight and is easy to maintain.

‌Application scenarios‌: Wafer butterfly valves are suitable for the control of general media such as water, HVAC systems, chemicals, petroleum, natural gas, etc., especially for small and medium-caliber pipeline systems, such as urban water supply and drainage and building heating systems.

‌Cost-effectiveness‌: Wafer butterfly valves have a simple structure and low manufacturing cost, and are suitable for cost-sensitive projects. Although the initial installation cost is low, its maintenance cost is also low, and it has high economic benefits in the long run.

Send Inquiry